| En komplet USB-strømforsynet laboratorie-enhed. Funktionsspækket PcLab2000-LT software til 2-kanals oscilloskop, spectrum analyser, optager, funktionsgenerator og bode plotter. Med generatoren kan du fremstille dine egne kurveformer via den integrerede signal kurve-editor. For automatiserede målinger er det endda muligt at fremstille kurvessekvenser, via. fil eller computer RS232 input. 
Egenskaber:
- Funktionsgenerator:
- crystal-based stability
- standard waveforms: sine, square and triangle
- predefined library waveforms included: sine(x)/x, DCV, sweep, ...
- Oscilloskop:
- auto set-up function and X10 option
- pre-trigger function
- readouts: True RMS, dBV, dBm, p to p, Duty cycle, Frequency…
- transient recorder:
- automatic storage of data
- automatic recording for more than 1 year
- record and display of screens
- bode Plotter:
- automated sync between oscilloscope and generator
- logatithmic scale option
- Volt or dB display scale
- phase plot option
- spectrum analyser:
- linear or logarithmic timescale
- operating principle: FFT (Fast Fourier Transform)
- FFT input channel: CH1 or CH2
- zoom function
      
Tekniske detaljer:
- general:
- markers for: amplitude/voltage and frequency/time
- input coupling: DC, AC and GND
- Supply from USB port (500mA)
- dimensions: 205 x 55 X 175 / 8.2 x 2.2 x 7"
- Funktionsgenerator:
- amplitude range: 100mVpp to 10Vpp @ 1KHz//600ohm load / 0V offset
- offset: from 0 to -5V or +5V max. (resolution 0.4% of full scale)
- vertical resolution: 8 bits
- square wave rise/fall time: 0.2µs
- sample rate: 12.5MHz
- typical sine wave distortion (THD): < 1%
- output impedance: 50ohm
- frequency range: from 0.005Hz to 500kHz
- Oscilloskop:
- Båndbredde: To kanaler DC til 12 MHz ±3dB
- Indgangsimpedans: 1 Mohm / 30pF
- Maks. indgangsspænding: 30V (AC + DC)
- Tidsbase: 0.1µs to 500ms per division
- Inputområde: 10mV to 3V/division
- Indgangsfølsomhed: 0.3mV display resolution
- Optagelængde: 4K samples / channel
- Sampling frekvens: 250Hz to 25MHz
- transient recorder:
- timescale: 20ms/Div to 2000s/Div
- max record time: 9.4hour/screen
- max. number of samples: 100/s
- min. number of samples: 1 sample/20s
- Bode Plotter:
- voltage range: 10mV, 30mV, 0.1V, 0.3V, 1V, 3V
- frequency range: 1kHz , 10kHz, 100kHz, 500kHz
- Frequncy start: 10Hz, 100Hz, 1kHz, 10kHz
- spectrum analyser:
- frequency range: 0 .. 120Hz to 12MHz
- FFT resolution: 2048 lines
- minimum system requirements:
- IBM compatible PC
- Windows™ 2000, XP, Vista *
- SVGA display card (min.1024 x 768)
- mouse
- free USB port 1.1 or 2.0
- CD Rom player
Filer |
