TEMP.FØLER -40>150°C BYGGESÆT

TEMP.FØLER -40>150°C BYGGESÆT

Stykpris v/ 1 stk.
219,00 DKK
Stykpris v/ 10 stk.
197,10 DKK
Model/Varenr.: K6001
Lagerstatus: På lager
stk.
This kit has been developed especially to be combined with the K6000 or K6002 to build a temperature regulation and control system. The advantage of a separate sensor lies in the fact that the distance between the actual controller and the sensor is of no importance.
 
 Tekniske detaljer:

  • sensor temperature range: -40°C (-40°F) to +150°C (302°F)
  • pulse width modulation: 200µsec/°C
  • linearity from -10°C (14°F) to 50°C (122°F): better than 0.5%
  • tested up to 50m (164') (distance between sensor PCB and controller)
  • supply voltage: 12VDC (± 2V) non-regulated
  • current: 20mA max.
  • PCB dimensions: 45 x 47mm (1.8" x 1.9")
  • recommended housing: G404
  • recommended adapter: PS1205
 
Filer:

 Ekstra information:

  • With temperatures below 0°C and above 70°C it is advisable not to install the electronic circuitry (pcb with components) near the sensor. If you experience difficulties with calibration, replace RV3, 5K with a 20K type, or replace the SG3524 IC ( Texas ) with a CA3524 ( Harris ) type.